Filter
Top Products
Black plate (140,1)
Method for turning the system off
The maintenance monitor can be turned
off even after it has been turned on. If you
want to turn it off, the remaining distance
and time calculation to the next
maintenance period is stopped, and a
message does not display to indicate an
approaching maintenance period.
1. Press the up
or down part of the
INFO switch and select Settings, and
then press the INFO button.
2. Press the up
or down part of the
INFO switch and select Maintenance,
and then press the INFO button.
3. Press the up
or down part of the
INFO switch to select the item you
want to turn off from the following,
and then press the INFO button.
l
Scheduled
l
Tire Rotation
l
Tire Pressure
4. Select OFF and press the INFO button.
qTrip Computer and INFO Switch
The following information can be selected
by pressing the up
or down part of
the INFO switch with the ignition
switched ON.
l
Approximate distance you can travel
on the available fuel
l
Average fuel economy
l
Current fuel economy
l
Average vehicle speed
l
i-ELOOP display (Type A instrument
cluster)
í
l
Lane departure warning system
(LDWS) display (Type A instrument
cluster)
í
l
Mazda Radar Cruise Control (MRCC)
display (Type A instrument cluster)
í
l
Settings (Type A instrument cluster)
l
Warning (Type A instrument cluster)
If you have any problems with your trip
computer, consult an Authorized Mazda
Dealer.
Distance-to-empty mode
This mode displays the approximate
distance you can travel on the remaining
fuel based on the fuel economy.
4-18
When Driving
í
Some models.
Instrument Cluster and Display
Mazda6_8DL2-EA-13F_Edition1 Page140
Monday, June 10 2013 3:52 PM
Form No.8DL2-EA-13F