Filter
Top Products
Black plate (435,1)
4. Move the air cleaner cover and create a
space large enough to work in.
5. Disconnect the connector from the unit
by pressing the tab on the connector
with your finger and pulling the
connector downward.
6. Turn the socket and bulb assembly to
remove it. Carefully remove the bulb
from its socket in the reflector by
gently pulling it straight backward out
of the socket.
7. Install the new bulb in the reverse order
of the removal procedure.
(Right side)
1. Make sure the ignition is switched off,
and the headlight switch is off.
2. Lift the hood.
3. Disconnect the clip.
Clip
Maintenance andCare
Owner Maintenance
6-43
Mazda6_8DL2-EA-13F_Edition1 Page435
Monday, June 10 2013 3:55 PM
Form No.8DL2-EA-13F