Filter
Top Products
88
Split Frequency Sonar Chart page, with
50 kHz view at left and 200 kHz view at right.
You can adjust the sensitivity in each window.
To adjust sensitivity in auto mode:
1. Press
MENU|ENT.
2. The unit asks which window (50kHz or 200kHz) you would like to
adjust. Press ← or→ to select the one you want |
ENT.
3. The Sensitivity Control Bar appears. Press ↓ to decrease sensitivity;
press ↑ to increase sensitivity. When it's set at the desired level, press
EXIT. (When you reach the maximum or minimum limit, a tone sounds.)
The Split Frequency Sonar Chart page allows you to adjust
sensitivity separately for each window.
Digital Data/Chart
This mode shows the chart on the right side of the screen. The left side has
five digital data boxes containing: Water Depth; Water Speed (from an op-
tional speed sensor); Water Distance (distance traveled or log, it also re-
quires a speed sensor); Surface Water Temperature and Voltage.