Filter
Top Products
87
Require DGPS
You can force iFINDER to require DGPS for reporting a valid position.
(Your unit must have a special DGPS antenna to receive these signals.)
Here's how to turn it on and off in Advanced Mode.
1. Press
MENU|MENU|↓ to GPS SETUP|ENT|↓ to REQUIRE DGPS|ENT.
2. To return to the last page displayed, press
EXIT|EXIT.
3. You can return to this command and press
ENT again to turn the fea-
ture off.
Require DGPS command on the GPS Setup Menu, Advanced Mode.
Screen Contrast and Brightness
The adjustments work the same in both Easy and Advanced Mode, but
you access the
SCREEN command differently in each mode:
In Easy Mode, you first press
MENU|↓ to SCREEN|ENT.
In Advanced Mode, you first press
MENU|MENU|ENT.
Once in the Screen menu:
To adjust the display's contrast:
1. The
CONTRAST slider bar is already selected. Press → or ← to move the
bar. The left end of the scale is minimum contrast; the right end is
maximum contrast.
Screen Command, left, and Contrast bar, right.