Filter
Top Products
86
Use Indoors
If you don't want to wait for iFINDER to prompt you to switch to the inside
setting, you can manually switch to indoor operation in Advanced Mode:
1. Press
MENU|MENU|↓ to GPS SETUP|ENT|↓ to USE INDOORS|ENT.
2. To return to the last page displayed, press
EXIT|EXIT.
3. You can return to this command and press
ENT again to turn the fea-
ture off, or just turn the unit off and back on again. iFINDER will
automatically resume searching for satellites.
Use Indoors selection box on GPS Setup Menu. With the box selected
as in this figure, the GPS engine is turned off to save power.
Reset Options
To reset all features to their factory defaults:
In Advanced Mode
1. Press MENU|MENU|↓ to SYSTEM SETUP|ENT|↓ to RESET OPTIONS|ENT|←
to
YES|ENT.
In Easy Mode
Hold down the PAGES key while you press PWR to turn the unit on.
NOTE:
Reset Options does not erase any waypoints, routes, icons or plot trails.
Advanced Mode's Reset Options command,
left, and the Reset Options Menu, right.