106
the first letter, then press → to move the cursor to the next letter and
repeat until the name is correct, then press
ENT|ENT. B. Jump down to
the lower selection list by pressing
ENT, then press ↓ or ↑ to select a
street from the list, then press
ENT.
3. The Find Streets menu reappears with the street you're searcing for in
the First Street box.
4. Now fill in the second street. Press ↓ to
SECOND STREET|ENT and the
Find by Name menu appears again. Just like before, there are two op-
tions: A. You can spell out the street in the top selection box. Press ↑ or
↓ to change the first letter, then press → to move the cursor to the next
letter and repeat until the name is correct, then press
ENT|ENT. B. Jump
down to the lower selection list by pressing
ENT, then press ↓ or ↑ to se-
lect the second street from the list, then press
ENT.
5. The Find Streets menu reappears with the first and second streets
dialog boxes filled in. In this example we selected 81st Street as our sec-
ond street. You could now use similar techniques to select a city or Zip
Code, but your search will probably be faster if you leave those boxes
blank. (You can specify a city and/or Zip Code later on to narrow the
search, if the resulting list is too long.)
Find intersection, left, and "Working" menu, center, Intersection list,
right.
6. To search for the intersection of the two streets, press ↓ to FIND
INTERSECTION|ENT. A message appears asking you to wait while the unit
finds the intersection. When the Intersections Found list appears, press
↑ or ↓ to select the intersection you are searching for and press
ENT. (In
the previous example, we selected the intersection of SW 80th Court
and SW 81st Drive in Miami, Fla.)
If you want to navigate to the found intersection, just press
MENU|ENT|EXIT.