Filter
Top Products
42
Power/lights on and off
To turn on the unit, press PWR. To turn on the backlight, press PWR
again. Pressing PWR once again will turn off the backlight. (Press EXIT
to clear any message or alarm displays.)
Turn off the unit by pressing and holding the
PWR key for 3 seconds.
Main Menu
Advanced Mode has a single Main Menu, which contains some function
commands and some setup option commands. The instructions in this
section will deal only with functions, the basic commands that make
iFINDER do something. iFINDER will work fine for these instructions
right out of the box with the factory default settings. But, if you want to
learn about the various options, see Sec. 5, System Setup and GPS
Setup Options.
1. To get to the main menu from any page: press
MENU|MENU. To clear
the menu screen and return to the page display, press
EXIT.
Main Menu, Advanced Mode.
Pages
Advanced Mode has four Page displays that represent the four major
operating modes. They are the Satellite Status Page, the Position Page,
the Navigation Page and the Map Page. They are accessed by pressing
the
PAGES key. Pressing PAGES repeatedly scrolls between the four
screens in an endless circular loop.
Each Page has a submenu screen associated with it. You access a Page
Submenu by pressing the
MENU key one time while the page is dis-
played. (Pressing the Menu key twice takes you to the Main Menu.)
Satellite Status Page
This page provides detailed information on the status of iFINDER's
satellite lock-on and position acquisition. No matter what page you are