Lowrance electronic Pro GPS Receiver User Manual


 
99
want to find addresses only within a particular city. This option is de-
signed so you can limit an address search to a single city if necessary (see
the note below).
If you select yes, there are two options: A. You can spell out the city
name in the top selection box. Press or to change the first letter, then
press to move the cursor to the next letter and repeat until the name
is correct, then press
ENT|ENT. B. Jump down to the lower selection list
by pressing
ENT, then press or to select a city name from the list,
then press
ENT. The city name you selected is now in the city field. To
return to the previous page, press
EXIT.
NOTE:
We recommend that you do not enter a city name unless the list you
are given is too large when you try searching without it. iFINDER
can actually search quicker without a city and you save time by not
entering a city name.
Find city field, left, Search in particular city only option, center, Find
City by name, right.
6. When the necessary search fields are filled in, press to FIND AD-
DRESS
|ENT. Your units asks you to wait while it searches for the ad-
dress. (If an address is not in the database, a message appears saying
the address could not be found.)
7. The unit will display a list of addresses. If the address you are look-
ing for is highlighted at the top of the list, press
ENT. If not, use and
to select the correct address from the list, then press
ENT. The Map
Page will then appear with the location selected by the cursor.
8. To navigate to the address, press
MENU|ENT|EXIT and your
iFINDER will begin showing navigation information to the address
pointed out by the cursor. If you are only looking up an address (not
navigating), just press
EXIT to return to the previous page.