Filter
Top Products
10
Using the down arrow key, highlight the
“Initialize GPS Receiver” menu, then
press the right arrow key. The screen
shown below appears.
This is the GPS initialization screen. The
position, altitude, time, and date the
GlobalNav 310 is currently using to find
the satellites is shown at the bottom of
this screen. Changing these values to
your local position and time will speed
the position lock.
To change the position, press the right
arrow key while the “EDIT LAT/LON” box
is highlighted. The screen shown at right
appears.
If your latitude is south, press the up or
down arrow key to change it. If it is north,
press the right arrow key to move the
change box to the first number in the latitude. Now press the up arrow
key to increase the number or the down arrow key to decrease it. Once
the first number in the latitude is set,
press the right arrow key once to move
to the next number in the latitude.
Keep pressing the arrow keys until the
latitude and longitude are set to your lo-
cal position. (Note: This position does not
have to be very accurate. If you can get
it within one degree of your actual posi-
tion, that will be fine.) When it’s set, press
the ENT key. The GlobalNav 310 accepts
your entry and returns to the GPS setup menu.