Filter
Top Products
55
From left to right, these figures show the menu sequence for naming
and saving a GPS Data File from AirMap's memory onto an MMC.
The unit will display first a progress then a completion message when the
data transfer is finished. To return to the Page view, press
EXIT|EXIT.
4. Loading: There may be more than one GPS Data File (*.USR) on
the card. To select a file, press
ENT to activate the selection box, use ↓
or ↑ to highlight the file, then press
ENT to accept the selection. Next,
press ↓ to
LOAD|ENT. The unit will display a completion message when
the data transfer is finished. To return to the Page view, press
EXIT|EXIT.
From left to right, these figures show the menu sequence for loading a
GPS Data File from an MMC into AirMap's memory.
Switch to Land Mode
To leave Aviation Mode and switch to Land Mode:
1. Press
MENU|MENU|↓ to SYSTEM SETUP|ENT|↓ to DISABLE AIRMAP|ENT.
2. Unit asks, "Are you sure you want to turn on land navigation mode?"
3. Press ←|
ENT and the unit switches to Land Mode.