Filter
Top Products
103
Set Local Time
The local time and date are saved when a waypoint is created. Begin by
pressing
MENU|MENU|↓ to SYSTEM SETUP|ENT|↓ to SET LOCAL TIME|ENT.
Set Local Time Command: left, Main Menu; center System Setup menu.
At right, the Time Settings menu.
Once in the Time Settings menu:
To set Local Time: Press ENT. Press ↑ or ↓ to change the first charac-
ter, then press → to move the cursor to the next character. Repeat until
the time is correct, then press
ENT.
To set the Month: Press ↓ to
MONTH|ENT. Press ↑ or ↓ to select the
month, then press
ENT.
To set the Day: Press ↓|→ to
DAY|ENT. Press ↑ or ↓ to select the day,
then press
ENT.
To set the Year: Press ↓|→ to
YEAR|ENT. Press ↑ or ↓ to select the
year, then press
ENT.
Adjusting the time, left, Adjusting the month, right.