Filter
Top Products
37
Additional information can be displayed using compass overlay data
that appears at the top of the page. This information can be customized
with the Compass Overlay Data command, which is discussed in Sec. 5,
System Setup and GPS Setup Options. You can select from 28 different
types of information to display.
Position page display option
The Position display provides detailed textual information on your pre-
sent position and the status of your trip. For example, it can display
information such as your current latitude, longitude, travel time to des-
tination and more.
Position display, left, Position display Customize Menu, right.
The Position display can be fully customized. The lower window can dis-
play ten of 22 types of navigation information. For customization instruc-
tions see the Customize Page Displays topic in Sec. 5, System and GPS
Setup Options. Some of the popular information displays include:
Altitude is height above sea level, not ground level. Speed (ground
speed) is the velocity you are making over the ground. Closing Speed
is also known as velocity made good. It's the speed that you're making
toward a destination.
Distance shows how far it is to the next waypoint you're navigating
toward. Total Distance tells how far to a final destination when navi-
gating a route or trail. If your route has multiple legs, this option will
total them for you.
Travel Time (ETE) is the time it will take to reach your destination
at your present closing speed. Arrival Time (ETA) is the local time
that it will be when you arrive at the destination, based upon your pre-
sent closing speed and track. Total Travel time tells how long it will
take to reach a final destination when navigating a route or trail.
Track is the heading, or the current direction you are actually traveling.