Filter
Top Products
35
Delete a Route
To erase a route, first press the MENU key, then highlight the “Plan/Edit
Routes” label and press the right arrow key. Now select the route you
want to erase at the top of the screen, then highlight the “Delete Route”
label and press the right arrow key. A message appears, asking if you
really want to erase the route. If you press the right arrow key, the route
will be erased. If you select “Yes” (by pressing the right arrow key) the unit
then asks if you want to erase the waypoints used in the route from memory
also. Press the right arrow key again to erase them, or the left arrow key
to leave the waypoints in memory. The unit returns to the routes menu.
Press the EXIT key to erase the menu.
CANCEL NAVIGATION
This unit continues to navigate to a recalled waypoint, the last waypoint in
a route, or the cursor position until you stop it.
To stop the navigation function, press the MENU key, then press the up or
down arrow keys until the “Cancel Navigation” label is highlighted. Press
the right arrow key. The unit stops showing navigation information.
Navigation Notes
If you are navigating with this unit, either to a waypoint or in a route and
shut it off, it will preserve the current waypoint number that it is navigating
to. It also saves the current route (if it is in use) and the route’s forward or
reverse order. When you turn the unit on, it will show navigation data to
the waypoint as soon as it locks onto the satellites as if it had never been
turned off.
SYSTEM SETUP
Many features are listed under the “System Setup” la-
bel on the main menu. These commands affect the ba-
sic operation of the unit. To use them, press the MENU
key, then highlight the “System Setup” label. Press the
right arrow key. The screen shown at right appears.
Backlight
The display has lights that can be turned on for night
use. To turn the lights on, simply press the PWR key.
To turn them off, press the PWR key again. An indica-
tor on the satellite status screen shows when the lights
are on.
The lights automatically turn off after 30 seconds to preserve the battery
power. It will do this even if the external power is applied to the unit.