Filter
Top Products
9-6E
MAINTENANCE WORK DONE BY KTM AUTHORISED WORKSHOPS IS NOT A SUBSTITUTE OF CARE AND CHECKS DONE BY THE RIDER!
PERIODIC MAINTENANCE 2006
50 MINIS
air/liquid cooled
A washed motorcycle can be checked more quickly which saves money!
Service Service
before
every every
every
5 hours 20 hours
race
ENGINE
Check engine for leaks
Change transmission oil
Check spark plug, change it if necessary, set electrode gap
Check the clutch engagement speed
CARBURETOR
Check carburetor for tight fit at intake flange
Check intake flange for cracks
Check idle setting when engine is warm
ADD-ON-PARTS
Check cooling system for leaks, antifreeze protection
Check exhaust system for leaks and correct fit
Check actuating cables for damage, smooth operation, and kink-less
arrangement, adjust and lubricate
Clean air filter and air filter box
BRAKES
Check fluid level, lining thickness, brake discs
Check brake lines and brake control cables for damage
Check/adjust function, smooth operation and free travel of
hand/footbrake levers
Check bolts of brake system for tight fit
CHASSIS
Check suspension strut and fork for leaks and proper function
Check swinging-fork pivot
Check/adjust steering-head bearing
Check all chassis bolts for tight fit (fork plates, axle nuts,
swinging-fork pivot, suspension strut)
WHEELS
Check spoke tension and rim joint
Check tire condition and inflation pressure
Check chain, chain wheels, chain wheel guides for wear, tight fit, and tension
Lubricate chain
Check wheel bearings for play
IMPORTANT RECOMMENDED MAINTENANCE PROCEDURES TO BE PERFORMED BASED ON A SEPARATE SUPPLEMENTARY ORDER
once
a year
Drain and clean the carburetor's float chamber
Perform complete fork maintenance
Clean and lubricate the swinging-arm bearing
Clean and lubricate the steering-head bearing and sealing elements
Change brake fluid