Filter
Top Products
1
2
2
3
A
4
4
2-4E
Bleeding oilpump for separate lubrication up to model 2003
Clamp oil lines 1 and 2 as shown.
Add 2 stroke engine oil (for example Motorex Cross Power 2T) with a
syringe until the bubble-free oil starts to leak out of the line
2.
After bleeding the oil pump, mount both oil lines and fill the oil tank
with 2 stroke engine oil (for example Motorex Cross Power 2T).
!
CAUTION
!
HOSE 2 LEADING FROM THE OIL PUMP TO THE CARBURETOR MUST BE INSTALLED
WITHOUT KINKS
.
Bleeding the oil pump for the separate lubrication from the 2004
model
Disconnect the oil line 3 from the oil tank and oil line 4 from the oil
pump. Add two-stroke engine oil for separate lubrication with a syringe
until the bubble-free oil leaks out of hole
A on the oil pump. Connect
the oil line
2 to the oil tank. Use the syringe to bleed the oil line 4 to
the carburetor and connect to the oil pump.
Afterwards, fill the oil tank with two stroke engine oil (e.g.: Motorex
Cross Power 2T).
!
CAUTION
!
A
LWAYS MAKE SURE YOU RUN THE OIL HOSES WITHOUT KINKS
.
Repair manual KTM MINI 50 air/liquid cooled Art.-Nr. 3.206.028 -E