2
3
2003
1
1
1
1
4
4
4
2
3
2004
6-4E
Repair manual KTM MINI 50 air/liquid cooled Art.-Nr. 3.206.028 -E
Mounting the clutch cover
– Put new seals in place and mount the clutch cover .
– Bolt clutch cover into place with 6 bolts M6x25
1, tighten the bolts
to 10 Nm (7 ft.lb).
Mount the ignition cover and water pump.
– Put the dowels 7x9x10 in place.
– Align the driving slot on the water pump drive
2 with the driver
blade
3 on the crankshaft (LC-engine).
NOTE: make sure the spring is mounted in the water pump shaft
(models from 2004).
– Put cover on and engage by turning the pump drive cover back and
forth.
!
CAUTION
!
DO NOT TRY TO MOUNT THE IGNITION COVER BY FORCE, OTHERWISE COMPONENTS
WILL BE DAMAGED
.
– Bolt 3 HH bolts M6x25
4 into ignition cover and tighten to 10 Nm
(7 ft.lb).