Filter
Top Products
1
2
3
4
5
6
3-2E
Repair manual KTM MINI 50 air/liquid cooled Art.-Nr. 3.206.028-E
Removing the engine
NOTE: the following steps are shown on a model with LC-engine, on a
model with AC-engine a few works are not necessary like draining
coolant liquid, removing and mounting the radiator and the radiator
shield, bleeding the cooling system.
Clean the entire vehicle thoroughly before removing the engine.
To avoid burns, allow the motorcycle to cool before starting to work.
– Jack up the motorcycle on a sturdy work stand.
– Turn quick release
1 on the seat 180°, lift back of seat slightly and
pull back.
– Remove the cover of the air filter by reaching through the recess in
the panel and pushing the locating tab 2 forwards with your finger.
– Remove air filter element.
– Loosen hose clamp
3 on the air filter box of the carburetor and
remove air filter box.
– Pull air filter box
4 up through the retaining bracket 5 by
deforming it.
– Close fuel cock and disconnect fuel hose
6 from the carburetor.