Getting Started
CZ76372,00001CA 1912OCT101/1
Theory of Operation
iGuide is a passive implement guidance system which
allows a machine to be driven in such a way as to keep
the implement on its desired track. It is able to do this
with a StarFire™ GPS receiver on both the machine and
the implement.
The following criteria are required:
•
Machine receiver (iTC only or SF3000)
•
Implement receiver (iTC only or SF3000)
iGuide requires a second receiver installed on the
implement and connected to the machine’s Implement
CAN Bus through the ISO connector. The following items
need to be included:
Hardware Needed:
•
Constant power harness on machine
•
Front Extension harness
•
Center Extension harness (as needed for long
implements)
•
Rear Extension harness (as needed for tow behind air
cart)
•
Implement Harness(s) for receiver (quantity may vary)
•
Implement GPS Bracket and receiver
•
Compatible only with GreenStar™ 2 2600 display (GS2)
and GreenStar™ 3 2630 (GS3)
Software and Settings:
•
Update StarFire receiver software.
NOTE: When updating the receiver software, only
one receiver may be connected to the CAN
Bus while updating the software. Software
updates for both receivers must be performed
at the vehicle receiver location.
•
Updated GreenStar display software
•
Machine and implement setup
•
Machine receiver TCM calibration
•
Implement receiver setup including offsets and TCM
calibration
•
Other setup including AutoTrac™, Client, Farm, Field
and so on
StarFire is a trademark of Deere & Company
GreenStar is a trademark of Deere & Company
AutoTrac is a trademark of Deere & Company
101
102110
PN=9