Tuning Guide
JS56696,00006D8 1931AUG091/1
Continued onnext page CZ76372,00001E2 1912OCT101/3
Setting Up Implement Offsets
Implement Offsets
Offsets “A”, “B”, and “D” are critical for iGuide to operate
efficiently.
Offset “E” is not required for iGuide.
NOTE: Offset “C” is required when using a non
centered implement.
A—Inline distance from
connection point to front of
implement.
B—Inline distance from front
to rear of implement.
C—Lateral distance from
connection point to control
point of implement.
D—Inline distance from
connection point to control
point of implement.
E—Inline distance from
connection point to
connection point for
second implement. Value
only needed if second
implement is used.
F—Offset Toggle Button
G—A+B Documentation/Swath
Control location when in
use.
PC11838—UN—20MAR09
Offsets
Setting Up Implement GPS Offsets
Implement GPS Offsets
Offsets “A”, “B”, and “C” are critical for iGuide to operate
efficiently.
A—Inline distance from
connection point to GPS
receiver.
B—Lateral distance from
implement center to GPS
receiver.
C—Vertical distance from GPS
receiver to ground with
implement engaged.
D—Lateral offset toggle button
E—Verify implement fore/aft
and offsets in the StarFire
setup pages.
PC11841—UN—23MAR09
GPS Offsets
302
102110
PN=40