Filter
Top Products
Integrating iGuide and iTEC Pro
CZ76372,00001E0 1912OCT101/1
Operation
PC11845—UN—23MAR09
GreenStar—Guidance
A—View Tab
B—Guidance Setting Tab
C—Shift Track Settings Tab
D—iTEC Pro Tab
E—Path Accuracy Indicator
F—Shift Track Left Button
G—Shift Track Center Button
H—Shift Track Right Button
I— Steer Sensitivity InputBox
J— Set Track 0 Button
K—iGuide Status Pie
L—Steer On/Off button
M—iTEC Pro Status Pie
N—iTEC Pro Enable Button
O—iTEC Pro Icon
1. Tracking Mode—The operation of iGuide and iTEC
Pro will be available only on straight tracking mode.
2. End of Turn Performance
a. When both systems are activated, the operator will
see two paths on the screen.
b. The solid white line is the implement path and
current guidance path.
c. The dashed white line is the projected vehicle path
and is shown as a reference for the operator.
d. If iTEC Pro detects a collision with an impassable
boundary, both solid and dashed line paths will turn
red until the collision is passed.
252
102110
PN=37