John Deere OMPFP10808 Automobile Parts User Manual


 
Tuning Guide
CZ76372,00001E2 1912OCT102/3
CZ76372,00001E2 1912OCT103/3
Offset “C” should match Receiver Height from Implement
Receiver softkey.
PC9966 —UN—09FEB07
StarFire iTC Implement Softkey
Check the GreenStar Display for correct inline
distance between vehicle receiver and implement
receiver.
Measuring in line dimension from receiver to receiver:
Measure the distance between the vehicle receiver to the
implement receiver and compare with the sum of offsets
“B” and “C” from Vehicle Offset page and dimension “A”
from the Implement Receiver Offset page. The distance
between and the distance found in adding these three
offsets, should match.
Example:
Distance between vehicle and implement receivers is
647.7 cm (255 in.).
Offsets:
Offset “A” is 342.9 cm (135 in.)
Offset “B” is 139.7 cm (55 in.)
Offset “C” is 165.1 cm (65 in.)
Total: 647.7 cm (255 in.)
PC12219 —UN—19AUG09
Receiver Offsets
NOTE: When measuring distance between vehicle and
implement receivers, measure from middle of
vehicle receiver to middle of implement receiver.
NOTE: For articulated tractors, distance from receiver
to connection point is “B” subtracted from “C”
(Example: distance = “C” “B” + “A”).
303
102110
PN=41