Filter
Top Products
Safety
DX,RIDER 1903MAR931/1
DX,WW,RECEIVER 1924AUG101/1
JS56696,00003A0 1922JUL081/1
Keep Riders Off Machine
Only allow the operator on the machine. Keep riders off.
Riders on machine are subject to injury such as being
struck by foreign objects and being thrown off of the
machine. Riders also obstruct the operator’s view
resulting in the machine being operated in an unsafe
manner.
TS290 —UN—23AUG88
Handle Electronic Components and Brackets
Safely
Falling while installing or removing electronic components
mounted on equipment can cause serious injury. Use a
ladder or platform to easily reach each mounting location.
Use sturdy and secure footholds and handholds. Do not
install or remove components in wet or icy conditions.
If installing or servicing a RTK base station on a tower or
other tall structure, use a certified climber.
If installing or servicing a global positioning receiver mast
used on an implement, use proper lifting techniques and
wear proper protective equipment. The mast is heavy and
can be awkward to handle. Two people are required when
mounting locations are not accessible from the ground
or from a service platform.
TS249 —UN—23AUG88
Operate Guidance Systems Safely
Do not use AutoTrac system on roadways.
•
Always turn off (Deactivate and Disable) AutoTrac
system before entering a roadway.
•
Do not attempt to turn on (Activate) AutoTrac system
while transporting on a roadway.
AutoTrac and iGuide are intended to aid operator in
performing field operations more efficiently. Operator is
always responsible for machine path. To prevent injury
to operator and bystanders:
•
Verify the machine, implement, and iGuide are set up
correctly.
•
Remain alert and pay attention to surrounding
environment.
•
Take control of steering wheel when necessary to
avoid field hazards, bystanders, equipment, or other
obstacles.
•
Stop operation if poor visibility conditions impair your
ability to operate the machine or identify people or
obstacles in machine path.
054
102110
PN=8