Filter
Top Products
Setup
JS56696,0000505 1901APR091/4
Continued onnext page JS56696,0000505 1901APR092/4
GPS Receiver Setup
MENU >> STARFIRE iTC Implement >> SETUP tab
allows access to StarFire iTC setup on the implement.
NOTE: The implement receiver will detect its position
automatically when it is attached to the implement
receiver application harness. If there is no
implement receiver shown on the CAN bus,
check implement harness connection.
NOTE: Original StarFire receivers cannot be used on
the implement or machine for iGuide.
NOTE: When updating the receiver software, only
one receiver may be connected to the CAN
bus while updating the software. Software
updates for both receivers must be performed
at the machine receiver location.
The number below the text on the StarFire iTC Softkey
shows the serial number of the receiver.
On the StarFire Main page the receiver definition (Machine
or Implement) is shown in the headline.
PC8663 —UN—05AUG05
MENU Softkey
PC9966 —UN—09FEB07
StarFire iTC Implement Softkey
PC9965 —UN—09FEB07
StarFire iTC Machine Softkey
PC12310 —UN—28SEP09
Machine iTC Receiver
PC11529—UN—10DEC08
Implement iTC Receiver
1512
102110
PN=25