Filter
Top Products
40
Entry/Exit Function
With the transmission in the P (PARK) position, the Memory system can automatically
move the driver’s seat BACKWARD and the steering wheel UP to make entering and exiting
the vehicle easier (Entry/Exit function).
To Turn ON/OFF Entry/Exit functions
1 With the ignition switch in ON mode, press
ENTER.
2 Select Comfort & Conv.
To turn ON/OFF the Entry/Exit functions individually, highlight Lift Steering Wheel on Exit
or Slide Driver’s Seat Back on Exit, then press ENTER.
To Cancel or Activate Entry/Exit function
With the shift lever in the P (PARK) position and the ignition switch in the LOCK (OFF)
mode, hold the SET button down for more than 10 seconds. The indicator light on the
Memory buttons will blink twice to indicate ON, and once to indicate OFF.
Seat Synchronization Function
When the driver’s seat is moved to a new position, the steering c
olumn and outside
mirrors can be set to automatically adjust or “synchronize,” along with the seat position.
Notes:
■ Synchronization of the steering column and mirrors is set to OFF as the DEFAULT position in your vehicle at time
of delivery.
■ If the outside mirrors or the steering wheel reaches its operating limit of range, seat synchronization will suspend
operation. Operation can be restored by driving or by pressing the Memory button (if programmed).
To Turn ON or OFF Seat Synchronization: Hold the SET button down for more than 10
seconds with the ignition switch in LOCK (OFF) mode. The indicator light on the Memory
buttons will blink twice to indicate ON and once to indicate OFF.
To Turn OFF Seat Synchronization Functions Using the Information Display Screen:
1 Push the ignition switch to ON mode.
2 Put the shift lever in the P (PARK)
position.
3 Press the SETTING button.
4 Highlight Comfort & Conv. and then press ENTER.
5 Highlight Lift Steering Wheel On Exit and turn OFF, the indicator will not illuminate
when the feature is turned OFF. Then press ENTER.
6 Highlight Slide Driver’s
Seat Back On Exit, then turn it OFF. Then press ENTER.
Opening the Fuel-Filler Door
1 Unlock the doors with the INFINITI Intelligent Key, the Door
Handle Request switch, Power Door Lock switch or the
Mechanical Key.
2 Push in on the left-hand side of the fuel-fi l
ler door to open.
Note: You MUST use one of the methods noted above in step 1 to unlock the fuel-fi ller
door. If the driver or front-passenger uses the inside door lock knob to unlock and exit the
vehicle, the fuel-fi ller door will remain LOCKED and will not open.