Filter
Top Products
NAVIGATION CONVENIENCEGETTING STARTED DRIVING CONTROLS COMFORT MEDIA CENTER
media center
27
Bluetooth
®
Hands-free Phone System with Navigation
(if so equipped)
With an overhead microphone and sound transmitted through the audio system speakers,
the Bluetooth
®
Hands-free Phone System utilizes Bluetooth
®
wireless technology, a touch-
screen and voice recognition to provide hands-free cellular phone communication.
System Operation Tips
■ Close all windows. Surrounding noises may interfere with system operation and performance.
■ Press the
button on the steering wheel to activate voice recognition.
■ Wait for the “Would you like to access Phone, Navigation, Information, Audio or Help?”
prompt and the listening tone before speaking.
■ Begin speaking a command within 1.5 seconds of the listening tone.
■ To cancel a voice recognition session, press and hold the
button for 2 seconds.
■ To increase or decrease the volume of the voice prompts, push the + or – (volume) control
switch on the steering wheel or turn the VOL (volume) knob on the audio system while the
system is responding.
■ Speak in a clear and natural voice without pausing between words.
■ The “Help” command will bring up the voice recognition command list.
■ Please refer to the cellular phone manufacturer’s Owner’s Manual for detailed information
regarding your Bluetooth
®
phone.
■ For recommended phones and detailed instructions, please visit
www.infi nitiusa.com/bluetooth.
Connecting Your Phone
Before using the hands-free feature, you need to set up, or
connect, the system to recognize your compatible cellular
phone(s). Five compatible Bluetooth
®
-enabled phones
can be connected. After setup, the system automatically
connects with a connected phone when the ignition is in
the ACC or ON position, as long as the phone is on and in
the vehicle.
Connecting Procedure
NOTE: The vehicle must be stationary when connecting the phone.
1 Press the SETTING button and select the “Bluetooth” key.
2 Select the “Connect Bluetooth” key and a pop up box will appear.
3 Read the information and select “Yes.”
3 A confi rmation screen will be displayed. Select “No.”
4 Choose a PIN code and select the “OK” key.
5 The standby message screen will appear. Enter the PIN code into the Bluetooth
®
audio
device. When the connecting is completed, the screen will return to the Bluetooth
®
setup display.