Filter
Top Products
COMFORT MEDIA CENTER NAVIGATION CONVENIENCEGETTING STARTED DRIVING CONTROLS
11
driving controls
Steering Wheel Controls
Cruise Control/Intelligent Cruise Control (Full-Speed Range)
Cruise Control
1 CANCEL Button
2 ACCEL/RES•COAST/SET Switch
3 ON/OFF Button
To
Set Conventional Fixed-Speed Cruise:
1 Press the ON/OFF button. The CRUISE indicator light
(located on the dot matrix display between the
speedometer and tachometer) will illuminate.
2 Accelerate to the desired speed.
3 Push DOWN on the COAST/SET switch and release. The CRUISE SET indicator light
will illuminate. Cruise Control will be set to the desired speed.
Intelligent Cruise Control (Full-Speed Range)
(if so equipped)
1 CANCEL Button
2 ACCEL/RES•COAST/SET Switch
3 ON/OFF Button
4 Following Distance Button
The Intelligent Cruise Control system can be set to one of two
cruise modes:
■ Vehicle-to-vehicle distance-control cruise.
■ Conventional fi xed-speed cruise control.
To Set Vehicle-to-Vehicle Distance-Control Cruise:
1 Press the ON/OFF button for less than 1.5 seconds. The CRUISE
indicator light , the set distance and set vehicle speed indicator
lights (located on the dot matrix display between the speedometer
and tachometer) will illuminate in STANDBY mode.
2 Accelerate to the desired speed.
3 Push DOWN on the COAST/SET switch and release. The CRUISE
SET indicator light
will illuminate. Cruise Control will be set
to the desired speed.
4 Press the Following Distance button repeatedly to change the set
distance to the vehicle ahead between long , middle
and
short
.
■ When a vehicle IS NOT detected ahead of you in the travel lane,
the set speed will be maintained.
■ When a vehicle IS detected ahead of you in the travel lane, the
set speed will adjust to maintain the set distance.
1
1
2
2
3
3
4