Filter
Top Products
COMFORT MEDIA CENTER NAVIGATION CONVENIENCEGETTING STARTED DRIVING CONTROLS
17
driving controls
Rearview Monitor
(if so equipped)
When the transmission is in R (REVERSE),
the center Display Screen will automatically
change to view the area behind the vehicle.
Approximate Distance to Objects:
Green = 7 - 10 feet
Yellow = 3 feet
Red = 1.5 feet
Around View Monitor (AVM)
(if so equipped)
The Around View Monitor (AVM) system is intended to help reduce the number of blind
spots for the driver when parking the vehicle. This system provides you with an overhead
360° view of other cars and objects but should be used only as a secondary means to
check areas surrounding the vehicle. Different views from around the vehicle can be shown
on the Information Display Screen. The Around View Monitor display consists of the left
and the right screens.
Operating the Around View Monitor
With the ignition switch in ON mode, press the CAMERA button or move the shift lever to
R (REVERSE).
When the shift lever is moved to R (REVERSE),
the Rear View will display on the left side of the
screen. When the shift lever is moved out of
R (REVERSE), the Front View will display.
Note: Front View will not operate when the vehicle is traveling
above 6 mph.
Right Side of the Screen
When the shift lever is moved to R (REVERSE), the Bird-Eye View will display on the right
side of the screen.
To Switch Views Displayed on the Right Side of the Screen:
With the Around View Monitor ON:
■ Press the CAMERA button to switch to the
Front-Side View. Press the CAMERA button
again to switch back to the previous screen.
(While in reverse) Press the CAMERA button
to switch to the Front-Side View. Press the
CAMERA button again to switch Bird-eye View.
OR
■ Select a button below on the Information Display Screen to change view.
TOP (Bird-eye View), SIDE (Front-Side View) or Wide (Rear-Wide View (in reverse))
then press ENTER.