Filter
Top Products
NAVIGATION CONVENIENCEGETTING STARTED DRIVING CONTROLS COMFORT MEDIA CENTER
media center
29
Bluetooth
®
System for Vehicles without Navigation
(if so equipped)
With an overhead microphone and sound transmitted through the audio system speakers,
the Bluetooth
®
Hands-free Phone System utilizes Bluetooth
®
wireless technology and voice
recognition to provide hands-free cellular phone communication.
System Operating Tips
■ Close all windows. Surrounding noises may interfere with system operation and
performance.
■ Press the
button on the steering wheel to activate voice recognition.
■ Wait for the tone before speaking.
■ Begin speaking a command within 5 seconds of the tone.
■ Speak in a clear and natural voice without pausing between words.
■ To go back to the previous command, say “Go back” or “Correction.”
■ To cancel a voice recognition session, simply wait 5 seconds, say “Cancel” or “Quit,”
or press the
button.
■ To increase or decrease the volume of the voice prompts, push the VOL (volume) control
switch + or – on the steering wheel or turn the POWER/VOLUME knob on the audio
system while the system is responding.
■ If the Voice Recognition system does not recognize your voice commands, train the system
using the Speaker Adaptation Mode. See your Owner’s Manual for detailed information.
How To Say Numbers
The system provides two commands for entering and dialing a phone number: “DIAL” and
“INTERNATIONAL CALL.” The “DIAL” command is used for domestic phone numbers up to
10-digits in length, starting with the area code. The “INTERNATIONAL CALL” command is used
when more than 10-digits need to be dialed or when special characters are required, such as: *,
# or +. When using these two commands, please follow the phone digit speaking rules below:
■ Only single digits 0 (zero) to 9 (nine) can be spoken.
■ When saying the phone number 800-662-6200, the system will accept “eight hundred”
in addition to “eight zero zero” or “eight oh oh.” 500, 700 and 900 are also supported.
■ The long-distance calling prefi x “1” is not required when making a call.
“Dial” Command Only
■ You can say all the digits of a 7- or 10-digit phone number at one time.
■ For a 10-digit number, saying the phone number in groups of 3, 3 and 4 digits may
improve recognition for some speakers. To use this group dialing method, say only the
fi rst 3 digits of the phone number. After the system recognizes the number, it will
request the next 3 digits and fi nally the last 4 digits.
■ If a phone number is incorrectly recognized, you can try entering the phone number
again using the 3-3-4 group dialing procedure by saying, “CHANGE NUMBER.”
"International Call" Command Only
■ You can say the entire phone number at once or in groups of any digit length.
■ For *, # and +, say “STAR,” “POUND” or “PLUS,” respectively.