Filter
Top Products
Stuck Mic The GX60/65 helps protect you from a situation
where the microphone may get stuck in the ON or
Transmit position. If the microphone is keyed for
longer than 35 seconds, the GX60/65 will return to
the receive mode on the selected frequency.
The statement “Stuc Mic” will appear on the display
in Standby frequency position until the transmit key
is released. In the Moving Map function, the
statement will be “Stuck.”
Com Radio
System
Information
(GX60/65
Only)
The Com Radio information page in the System
Function provides system level details about the
operation of the Comm radio function. Information
includes: software version, rf signal strength, audio
noise level, side tone adjustment, intercom squelch,
and headphone level.
Press
SYS and then turn the LARGE knob to reach the
Comm Radio Information page. Press
ENTER.
COMM Info
Press ENTER
10-9
Comm Radio Operation
RF Signal
Level
Noise
Level
Intercom
Level
Sidetone
Level
Turn LARGE Knob
Headphone
Level
Intercom
Squelch Mic1
Press SEL
Turn SMALL
Knob
Press ENTER
Press SEL
Turn SMALL
Knob
Press ENTER
Press SEL
Turn SMALL
Knob
Press ENTER
Press SEL
Turn SMALL
Knob
Press ENTER
Transmit
Press SEL
Turn SMALL
Knob
Press ENTER
Intercom
Squelch Mic2
Press SEL
Turn SMALL
Knob
Press ENTER