Filter
Top Products
46
Views
Recording and Playback
The Recording feature records active sonar information. When the recording is
played back, the views that were active during the recording are available in
Playback. The Recording and Playback feature is available when an optional-
purchase SD memory card is installed and Screen Snapshot is On (see Setup
Menu Tab: Screen Snapshot). Saved Recordings can be played back from the
Snapshot and Recording View.
Start Recording:
1. From the Snapshot and
Recording View, press the MENU
key once to open the Snapshot
and Recording X-Press™ Menu.
2. Highlight Start Recording, and
press the RIGHT Cursor key. A
waypoint will also be created at
the boat location, and the
recording shares the same file
name (.SON).
Stop Recording
:
1. In any view, press the MENU key
once to open the Snapshot and
Recording X-Press™ Menu.
2. Highlight Stop Recording and
press the RIGHT Cursor key.
Notes about Recording:
• While recording, press the EXIT key to exit the Snapshot and Recording
X-Press™ Menu and scroll to a different view. Recording will continue.
• The slider bar at the bottom of the Snapshot and Recording View shows
the recording progress and remaining space on the SD memory card.
• Pings Per Second: For maximum performance, keep the Pings Per
Second setting on Auto
(see Snapshot and Recording X-Press™ Menu).
• Viewing saved Screen Snapshots and Recording Playback are not
available while in recording mode.
Start Recording
From Snapshot
and Recording
View, select
Start Recording
from the
X-Press™ Menu.
Slider Bar