Filter
Top Products
84
Sonar X-Press™ Menu
Upper Range
(Advanced: Sonar, Split Sonar, Circular Flasher,
and Big Digits Views only)
Settings: Various, see below.
Upper Range sets the shallowest depth range that will be displayed on the Sonar,
Split Sonar, Circular Flasher, and Big Digits Views. Upper Range is often used with
Lower Range.
NOTE: A minimum distanceof 10 feetwillbe maintained between theUpper and
Lower Range regardless of the manual settings entered.
The available Upper Range settings are determined by your Humminbird® model
as follows:
• 587ci HD/597ci HD: 0 to 990 ft, 0 to 397 m (International Models only);
Default = 0
• 587ci HD DI/597ci HD DI: 0 to 990 ft, 0 to 397 m (International Models
only); Default = 0
• 597ci HD XD: 0 to 3190 ft, 0 to 972 m (International Models only);
Default = 0
Lower Range
Settings: Various, see below.
Lower Range sets the deepest depth range that will be displayed by the unit.
Auto: The Lower Range will be adjusted by the unit to follow the bottom
automatically. Auto is the default setting.
Manual: You can adjust the Lower Range to lock the unit on a particular depth.
“M” will be displayed in the lower right corner of the screen to indicate the unit
For example, if you are only interested in the area between 20 and 50 feet deep,
you should set the Upper Depth Range to 20 and the Lower Depth Range to 50.
The Sonar View will then show the 30 foot area between 20 and 50 and will not
show the surface or the bottom (assuming the bottom is deeper than 50 feet).
Greater detail will be shown for the area between 20 and 50 feet.