Filter
Top Products
147
Setup Menu Tab
Demonstration
Settings: Off, Visible; Default = Visible
Demonstration controls whether the Demonstration Mode is visible or off. The
Demonstration Mode appears on the screen if you don’t press any keys during
the warning screen at power up. Menu settings cannot be saved in
Demonstration (see Power On and Start-Up Options Menu).
Sound Control
Settings: No Sounds, Alarms Only, All Sounds; Default =
All Sounds
Sound Control allows you to set when the control head will beep or sound
because of key presses and/or alarms.
Screen Snapshot
Settings: Off, On; Default = Off
Screen Snapshot activates the screen snapshot function. When Screen
Snapshot is enabled, pressing the MARK key creates a saved screen snapshot
on the optional-purchase SD memory card installed in your unit’s card slot. All
active menus, dialog boxes, warnings, and messages are captured and saved
automatically.
NOTE: You must have an optional-purchase SD memory card installed for the
Screen Snapshot feature to work.
NOTE: If you use your SD memory card in two different Fishfinder units that have
different screen sizes, the recordings made on one unit will still be present on the
card, but will be represented by the Unavailable icon (circle with a slanted line
through it) on the Snapshot and Recording View on the other unit.
NOTE: For more information, see Snapshot and Recording View and
Snapshot and Recording X-Press™ Menu.