Filter
Top Products
13
MARK Key
Press the MARK key while in any view to mark the position of a
waypoint. The MARK key function works if you have the GPS
receiver connected.
• Active Cursor: The waypoint will be marked at the cursor location.
• Without Active Cursor: The waypoint will be marked at the boat
location.
• If Screen Snapshot is active, a waypoint will be created, and a screen
snapshot will also be saved to the optional-purchase SD memory card
(see Views: Snapshot and Recording View). Navigation is not affected
by the Screen Snapshot feature.
NOTE: If Screen Snapshot is enabled but there is not a GPS receiver connected,
pressing the MARK key will capture the screen image and display an error saying
that a GPS position fix is required to create a waypoint.
NOTE: You must have an optional-purchase SD memory card installed for the
screen snapshot feature to work.
GOTO Key
The GOTO key has multiple functions, depending on the situation:
• Active Cursor: Press the GOTO key while in any view to create a
waypoint and start navigation towards that waypoint.
• Without Active Cursor: Press the GOTO key to display the saved
waypoints list, and then highlight a waypoint. Press the RIGHT Cursor
key to begin navigation.
ZOOM (+/–) Key
The Zoom (+/–) key has multiple functions, depending on
the situation:
• In any of the Navigation Views or the Sonar Zoom View, press the
+/– Zoom key to change the scale of the view to appear closer or farther
away. See Views and Introduction to Navigation for more information.
Key Functions