Filter
Top Products
Introduction
6 Apollo SL30 Installation Manual
OTHER REQUIRED MATERIALS
The SL30 is intended for use with standard aviation accessories. External devices required for
various installations are listed below. Depending upon the installation, this will include items
such as:
• back course annunciator
• a CDI or HSI
• a Comm antenna
• NAV antenna
• NAV antenna splitter (if dual SL30)
• a microphone(s)
• a speaker or headphone
• audio panel
SPECIAL TOOLS REQUIRED
Crimp Tool
A crimp tool meeting MIL specification M22520/1-01 and a positioner/locater are required to
ensure consistent, reliable crimp contact connections for the rear 15-pin and 37-pin
connectors. These tools are available from:
For pin P/N 245-0022
Astro Tool Corp. Phone (503) 642-9853
21615 SW TV Highway Fax (503) 591-7766
Beaverton, OR 97006
Crimp tool: Astro Tool part #615708
Positioner: Astro Tool part #616356
For pin P/N 245-0027
ITT Cannon Phone (714) 261-5300
1851 E. Deere Ave. Fax (714) 575-8324
Santa Ana, CA 92705-6500
Insertion tool: ITT part # 274-7006-000 (Desc. CIET-20HD)
Regular duty Crimp tool: ITT part #995-0001-585 (Desc. M22520/1-01)
Regular duty Locator tool: ITT part #995-0001-244 (Desc. TH25)
Heavy duty Crimp tool: ITT part #995-0001-584 (Desc. M22520/2-01)
Heavy duty Locator tool: ITT part #995-0001-604 (Desc. M22520/2-08)