Filter
Top Products
•
Send serial data matching the NMEA formats to any
serial device in the cockpit capable of accepting it
•
Disable the serial data port
*See your II Morrow dealer or contact the
factory for information about the optional
Precedus/PC Interface Kit. Consult kit
documentation for instructions on proper serial
port settings.
Press to highlight the “SERIAL
I/O” function. Press the
buttons to select your choice.
The Precedus allows you to customize not only the content
of the Navigation function pages, but also the number of
information pages. These pages are the displays of
navigation information, such as ground speed, altitude, CDI,
distance to a waypoint, etc. The default value is two pages.
You may select from zero to four pages. If you choose
RESET, two pages will be selected and any modifications to
your NAV Information pages will be removed.
Press to highlight the “NAV
PAGES” function. Press the
buttons to select your choice.
Press when you have completed
your System Setup choices.