Filter
Top Products
Creating an
Approach
Route
The Precedus allows you to setup an approach route using
the established approach waypoints.
1. Select “EDIT” from the Route Options
with the buttons and press
. Then, select “INS” and press
.
2. Use the arrow buttons to select the
desired airport designator and then press
.
3. For the next waypoint on the route,
select “APP” from the Route Options
with the buttons. Press
.
Note
The cursor must be below the desired airport
and at the last entry for your flight plan.
Inserting an approach automatically removes
the airport identifier and inserts the approach
waypoints.