Filter
Top Products
85
Section 4
GPS Navigation
Auto-Routing
Highlight your choice and press ENTER to begin the route calculation
and display the Map Navigator Page. While the route is being calculated a
small window depicting route waypoints will appear in the lower left corner
of the display. If there are no connecting roads to the destination from your
current location, a ‘Route Calculation Error’ message will display.
When the route has been calculated, the Map Navigator will display a
wide overlay of the route on roads leading to the destination or a direct
line to the destination. Directions to travel are displayed at the top of the
page with distance to go and time remaining at the bottom. As you move
along the route the directions to travel will update and indicate changes in
direction along with graphic turn arrows at Junctions and corners. Turns are
also indicated by a voice message, best utilized with the aid of an ear bud or
hands-free kit. Turn voice On/Off from the General Setting Tab, See page 55.
To view route options, press the MENU key with the View Turns Page
displayed. Options are: Stop Navigation, Recalculate, Use Detour, Save Route,
and Show Arrival Times/Show Time to Go.
To view the Route Turns list, press the MENU key while navigating by
selecting ‘View Turns’ from the Map page options menu. Use the ARROW
key to scroll up and down the list of turns. Press ENTER for a zoomed in
view of that turn with distance from your current location.
To save a route for future use, press the MENU key with the Map Naviga-
tor displayed and then select Routes from the Options List. Press ENTER to
display the Current Route name and all Saved Routes. With the ‘Save’ button
highlighted, press ENTER to save the current route to the list. To navigate
any saved route, highlight the route and press ENTER.
To rename a route, highlight the desired route from the routes list and
press the MENU key. Select ‘Rename’ from the Options list and press ENTER
to display the route name field. Enter the desired name using the KEYPAD
keys and press ENTER when completed.
Route Displayed on Map
Route Calculation Window
Direct Route on Map
Route Calculation Error Message
Route Turns List
Route Turn on Map
Saved Routes List
Route Options
Detour Distance
Options
NvTlkGSMManual copy.indd 85 12/2/2002, 8:43:12 AM