Filter
Top Products
57
Section 3
Network Settings
Phone Operation
Network Page
Network
Network settings allow you to determine network preferences, view the
status of the current network operator, select a network, and enable/disable
the Service Indicator (LED).
Network Selection - When Roaming outside your home network
this feature allows you to determine whether you want the NavTalk
to select a network automatically or allow you to choose a network
of your own choice. Highlighting this field and pressing ENTER will
display the Searching for Network Page
Preferred Networks - Allows you to choose a network from a list of
preferred networks that you have created and stored in the unit or that
have been programmed into the SIM card.
To enter preferred networks to the selection list:
1. Use the ARROW key to highlight the Preferred Network fi eld and press
ENTER to display the Preferred Network List.
2. Use the ARROW key to move to an empty slot on the list and press
ENTER to start the entry process. Use the KEYPAD to enter the code
for the network. The network name will appear above the entered code.
To select a network from the preferred networks list:
1. Select ‘Manual’ from the Network Selection Field Options.
2. Highlight the Preferred Networks fi eld and press ENTER to display the
list of networks. Highlight the desired network and press ENTER.
Operator - Displays the current network operator selected from the
network list or a network automatically selected while roaming.
Network Selection
Options Menu
Displays Currently
Selected Network
Preferred Network
Entries List
Network Entries
List Options
Insert Options
Displays Status of
Service Indicator
(LED)
Service Indicator
Options Menu
Service Indicator - Controls the LED that signals
the Service Status. The Options Menu allows On
for display, On for display only when connected to
the Handsfree Kit, and Off.
Seaching for Network Page
NvTlkGSMManual copy.indd 57 12/2/2002, 8:42:45 AM