Filter
Top Products
62
Reference
Editing Routes
The GPSMAP 188/188C/238 Sounder’s route edit mode also allows you to insert a new route point
in any route leg using the map cursor.
To insert a new point between two existing route waypoints:
1. Use the ARROW KEYPAD to select the leg in which you want to insert the new waypoint (the
route line will highlight and change to a dotted line when the leg is selected) and press ENTER.
2. Move the cursor to the new map position, existing waypoint, or map item (You will see ’ADD’
below the arrow and the route lines will move with the arrow) and press ENTER.
3. If you are not inserting an existing point, press ENTER to confi rm the new waypoint.
4. Press QUIT to return to the Route Review page.
• Add Before — Insert a waypoint into the route points list.
To insert a point into the route:
1. From either the Route Review or Active Route pages, use the ARROW KEYPAD to highlight the
point you wish to insert the new point before and press MENU.
2. Highlight ‘Add Before’ and press ENTER.
3. From the ‘Find’ menu, highlight ‘Waypoints’ and press ENTER. (You may also choose from other
points, such as Cities, Tide Stations, etc. from this list.) Select the point you want and press ENTER
twice. (See page 51 for searching for waypoints by name.)
• Remove — Remove a point (waypoint or map item) from a route. This option is available from both
the Route Review and Active Route Pages.
To remove a point from a route:
1. From either the Route Review or Active Route pages, use the ARROW KEYPAD to highlight the
point to remove and press MENU.
2. Highlight ‘Remove’ and press ENTER.
Highlight the route leg
on which you wish to
insert a waypoint and
press ENTER.
Drag the route leg to
an existing waypoint,
map item, or an
open spot on the map
(shown) to create a
new route point.
188188C238 Manual Part 2.indd 62 6/30/2003, 3:32:14 PM