Filter
Top Products
ROUTES
Active Route/Page Options
The following options are available from the active route page:
• Invert Route?— activates the active route in reverse order and
begins navigation.
• Activate Route?— reactivates the active route and selects the route
leg closest to your current position as the new active leg.
• Edit On Map?— allows you to edit the selected route graphically.
(See pages 53-54 for specific instructions.)
• Clear Route?— allows you to clear all waypoints from the
selected route.
• Copy Route?— allows you to copy the waypoints of the active route
to another route.
• Change Data Fields?— allows you to define the data displayed in
the distance and ETE fields. Four data options are available:
• DIS– distance to active wpt • DTK– desired track
• ETE– estimated time enroute • ETA– estimated time of arrival
• Restore Defaults?— resets all active route page options to the
factory settings.
• Deactivate Route?— stops navigation of the route you are
currently navigating.
• Setup Simulator?— allows you to define speed, course and
position values while in simulator mode. See the Getting Started Tour
for more on using the simulator mode.
8
The ‘Change Data Fields?’ option
lets you specify what information
is displayed for each route
waypoint. Four data options are
available: distance, desired track,
and ETA or ETE to each route
waypoint.
60
175 Manual 7/31/98 3:57 PM Page 60