Filter
Top Products
• Configure the Map?— allows you to determine what chart features are
displayed on a particular map scale to prevent excessive clutter. The map
configuration page features an on/off grid with a list of chart features down the
left side. The zoom scales are displayed across the top of the grid with the
chart scale currently in use also indicated. The far-left scale setting represents
all map scales 64 nm and above. A check mark in a grid box indicates that the
chart feature listed will be displayed at the corresponding scale.
Individual grid boxes may be turned on and off through a popup scale
window, while entire rows may be controlled by using the map configuration
options page (accessible through the O key).
To use the map configuration grid:
1. Use the R keypad to select the desired map item and press T. A popup
window will appear with the current settings displayed.
2. Use the R keypad to highlight the scale you want to change.
3. Press T to change the on/off setting.
4. Press Q to finish.
To turn an entire row on or off:
1. Use the R keypad to select the desired map item.
2. Press the O key.
3. Select the ‘Enable Row?’ or ‘Disable Row?’ option and press T.
The map configuration page also allows you to set the moving map display
to a North Up, Track Up or Desired Track Up orientation.
To change the map orientation:
1. Use the R keypad to highlight the ‘Orientation’ field and press T.
2. Select the desired setting and press T.
MAP PAGE
Map Configuration
A. The map
configuration grid
allows you to define
what items appear
on the display at
each map scale.
B. To turn an entire
row on for the
selected map item,
highlight the ‘Enable
Row?’ option and press EDIT/ENTER.
33
3
175 Manual 7/31/98 3:56 PM Page 33