Filter
Top Products
Creating and Navigating Routes
The last form of navigating to a destination with the
GPS 45XL is by creating a user-defined route. The route
navigation feature lets you plan and navigate a course from
one place to another using a set of pre-defined waypoints.
Routes are often used when it’s not practical, safe or possi-
ble to navigate a direct course to a particular destination
(e.g., through a body of water or impassable terrain).
Routes are broken down and navigated in smaller seg-
ments called ‘legs’. The waypoint you are going to in a leg
is called the ‘active to’ waypoint, and the waypoint immedi-
ately behind you is called the ‘active from’ waypoint. The
line between the ‘active to’ and the ‘active from’ waypoint is
called the ‘active leg’.
Whenever you activate a route with the GPS 45XL, it
will automatically select the route leg closest to your posi-
tion as the active leg. As you pass each waypoint in the
route, the receiver will automatically sequence and select
the next waypoint as the ‘active to’ waypoint.
Reference
Route
Navigation
31
Waypoint 2
(‘active to’ waypoint)
Waypoint 1
(‘active from’ waypoint)
‘Active Leg’
GPS 45XL Manual C 8/4/98 3:06 PM Page 31