Filter
Top Products
To rename a stored waypoint:
1. Highlight the ‘RENAME?’ field and press
E
.
2. Enter the new waypoint name and press
E
.
3. Press the
E
key to confirm your changes.
To delete a stored waypoint:
1. Highlight the ‘DELETE?’ field and press
E
.
2. Press the
L
key to select the ‘YES’ prompt.
3. Press
E
to delete the waypoint.
Scanning Waypoints
As you manually enter a waypoint’s name, the GPS
45XL’s waypoint scanning feature will automatically display
the first numerical or alphabetical match of the character
you have entered to that point. This helps eliminate the
need to always enter a waypoint’s complete name.
To scan waypoints from a waypoint field:
1. Highlight the waypoint name field and press
E
.
2. Press the
L
key to clear the name field.
3. Use the
U
and
D
keys to scroll through waypoints.
4. If you have more than one waypoint that begins with the
same letter or number, you must use the
R
key to move to
the next character positions as needed. Only the first char-
acter match is listed for each character set.
5. Once you’ve found the desired waypoint, press
E
.
Reference
Creating &
Using
Waypoints
27
To delete a waypoint, con-
f i r m the ‘Yes?’ pro m p t .
Route or active waypoints
may not be deleted until
they are removed from the
route or the GOTO h a s
been cancelled.
The waypoint scanning fea-
ture will offer the first way-
point that matches the char-
acter or characters you
have entered to that point.
GPS 45XL Manual C 8/4/98 3:06 PM Page 27