Filter
Top Products
Clearing the Track Log
After you’ve used the GPS45XL for a few trips, you
may find that your map display has become a bit messy
from keeping track of your every move. To get a feel for
how the menu page works, let’s clear the track log (the plot
points left on the map page) we’ve just created during the
Getting Started tour.
1. Press
P
or
Q
until the menu page appears.
2. Use the
D
key to move the field highlight to the
‘TRACKLOG’ option.
3. Press
E
to access the track log page.
4. Press the
U
key twice to highlight the ‘CLEARLOG?’
option. The clear log confirmation page will appear.
5. Use the
L
key to highlight the ‘Yes’ prompt.
6. Press
E
to finish.
Turning the Receiver Off
You’ve now gone through the basic operation of your
new GPS receiver and probably know a little more than you
think about how it works. We encourage you to experiment
with the GPS 45XL until it becomes an extension of your
own navigation skills. If you encounter any problems using
the unit or want to take advantage of the GPS 45XL’s more
advanced features, refer to the reference section.
To turn the GPS 45XL off:
1. Press and hold the
B
key for 3 seconds.
16
Getting Started
Track Log/
Power Off
Highlight the CLEARLOG?
prompt and press ENTERto
clear the track log. Once all
768 points are used, the old-
est point will be continuous-
ly deleted to make room for
the latest track log point.
Confirm the track log warn-
ing page to clear the log.
GPS 45XL Manual C 8/4/98 3:06 PM Page 16