Filter
Top Products
30 eTrex HC series Owner’s Manual
MaIn paGeS
Sight ‘N Go Navigation
Sight ‘N Go navigation is available only on the
Summit HC and Vista HCx with electronic compass.
To use Sight ‘N Go to navigate:
1. Press MENU > Sight ‘N Go to start the feature.
The compass ring with pointer is in-line with the
two white sighting marks, one at the base of the
screen and one at the top of the screen.
Sighting Page
2. Hold the unit at eye level and line up the two
sighting marks with the distant object. Press
ENTER to lock the direction.
3. Select Set Course.
4. Begin traveling to your destination on a course
line using the course pointer as a guide.
OR
Select Project Waypoint.
Project Waypoint Page
5. Enter an estimated distance from your current
location to establish a projected waypoint
location.
6. Select Go To to open the Map page and begin
navigation to the projected waypoint. The
Compass page shows a bearing pointer for
guidance.