Filter
Top Products
GettInG Started
Transferring Data to a microSD
™
Card
The eTrex Vista HCx and Legend HCx are equipped
with a microSD data card slot.
To install a microSD card:
1. Remove the battery compartment cover from
the back of the unit.
2. Locate the card slot at the upper-left edge of
the battery tray, and slide the card into the slot.
3.
Press down on the card and release quickly
to eject it from the slot and remove it from the
eTrex.
To transfer map data to a microSD card:
1. Lift the weather cover from the USB port on the
back of the unit.
2. Connect the USB cable to the USB port on your
computer and to the mini-USB port on the back
of the unit.
3. Follow instructions for selecting and
downloading maps provided with the
MapSource map data disk.
6 eTrex HC series Owner’s Manual
PUSH TO EJECT
Taiwan
Installing and removing
the microSD card
PUSH TO EJECT
�ccessing the microSD
card slot
microSD card
location
Battery
compartment
with cover
removed
USB port
weather cover
USB port
microSD card inserted in
card slot
Contacts on card must face
away from the batteries.
�ccessing the USB port