Filter
Top Products
eTrex HC series Owner’s Manual 17
BaSIc operatIon
To set up a track log:
1. Press MENU twice > Tracks.
2. Select Setup.
Data card option
(HCx units only)
Wrap When Full—the track log records over
the oldest data with new data.
Record Method—distance records track points
after a specified distance is traveled. Time
creates track points after a specified time has
elapsed. Auto (recommended) allows you to
choose from five intervals.
Interval—records a track according to the
Record Method and Interval. Enter a specific
distance, time, or frequency.
•
•
•
Color—select the color of the active track on
the map.
Log Track to Data Card—(HCx units only)
records the current track log to the microSD
card, in addition to the unit’s internal memory.
Using this option allows you to record a large
number of track points (depending on the
capacity of the microSD card). Track logs on
the data card are .gpx GPS position data files,
and are not used by your unit.
To save the entire track log:
1. Press MENU twice > Tracks.
2 Select Save. A message appears asking you if
you want to save the entire track.
3. Select Yes to save the track.
•
•