Filter
Top Products
eTrex HC series Owner’s Manual 29
MaIn paGeS
To calibrate the electronic compass:
1. Press MENU > Calibration.
2. With Start selected, press ENTER, and follow
on-screen directions for holding and turning the
unit.
Hold the unit
level and turn
slowly.
A Just Right, Too Fast, or Too Slow message
appears notifying you to adjust your turning
speed. Hold the unit level while turning.
A Calibration Successful message appears
when nished.
If a Calibration Failed message appears,
repeat the process.
3. Press ENTER to return to the Compass page.
•
•
•
Compass Page Options
Sight ‘N Go—navigate to an object within your
sight (Vista HCx and Summit HC only).
Stop/Resume Navigation—turns active
navigation for a route or Go To on and off.
Recalculate—recalculates the path to a
destination.
Course or Bearing Pointer—toggles between
the course pointer and the bearing pointer.
Data Fields—selects the number of data elds
that appear on the Compass page.
Change Data Fields—selects the type of data
you want to show in the data elds.
Calibrate Compass—accesses the compass
Calibration page (Vista HCx and Summit HC
only).
Restore Defaults—returns to factory settings.
•
•
•
•
•
•
•
•