Filter
Top Products
eTrex HC series Owner’s Manual 9
BaSIc operatIon
To calculate a location by averaging:
1. Find a location that you want to calculate an
average for, press M�RK > �vg to begin
averaging.
2. Press Save.
Projecting a Waypoint
Create a new waypoint by projecting the distance and
a bearing from one location to a new location.
To project a waypoint:
1. Press FIND > Waypoints.
2. Select the waypoint you want to project. The
Waypoint Information page opens.
3. Press MENU > Project Waypoint to open the
Project Waypoint page.
4. Enter the distance and bearing to the projected
waypoint in the appropriate elds, and press
QUIT when nished.
Proximity Waypoints
Use the Proximity Waypoints page to define an alarm
circle around a waypoint. (HCx version shown.)
Proximity Waypoints Page
To add a proximity waypoint:
1. Press MENU twice > Proximity.
2. Select an empty line, and press ENTER.
3. Select a waypoint from the Waypoints List or
from any other group of Find items to open the
information page for the item.
4. Select Use to add the point to the list on the
Proximity Waypoints page.
5. Using the ROCKER, select the Radius eld
and enter a value.