Garmin 3206 GPS Receiver User Manual


 
GPSMAP 3206/3210 Owner’s Manual 53
MaIn Menu > tracKs tab
MaIn
Menu
Tracks Tab
Use the Tracks tab to specify whether or not to record a track log, dene how it
is recorded, or save track log data for future use. The Tracks tab also provides an
indicator of the memory used for the active track log allows you to clear the track
memory. The Track tab is divided in two sub tabs: Active and Saved.
For more information setting up track options and saved tracks, see pages 23–24.
Active Sub Tab
The Active sub tab shows the amount of track memory used and current settings
for the active log (the log currently being recorded). The active log stores up to
approximately 10,000 track log points, based on the criteria specied in the Track
settings.
The following settings are available:
Record Mode—allows you to select one of three track recording options:
Off—No track log is recorded. If you select Off, you cannot use the
TracBack feature.
Fill—a track log is recorded until the track memory is full.
Wrap—a track log is continuously recorded, wrapping through the
available memory (replacing the oldest track data with new data).
Color—allows you to specify a color used to show the active track log on
the Map and Highway Pages.
Interval—denes the frequency at which the track plot is recorded. Three
interval settings are available:
Distance—records the track based on a user-dened distance between
points.
Time—records track plot based on a user-dened time interval.
Resolution—records the track plot based on a user-dened variance
from your course over ground or changes in water depth/temp
(if equipped). The Resolution option is the default setting and is
recommended for the most efcient use of memory and TracBack
performance. The distance value (entered in the value eld) is the
maximum error allowed from the true course before recording a track
point.
Value—denes the distance or time used to record the track log.
The following soft keys are available:
Save—saves the current active track log.
Clear—clears the active track log currently stored in memory.